Supplemental Restraint Systems

Inspection On Vehicle

~2min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures for the No. 1 lower instrument panel airbag assembly.

PROCEDURE

1. INSPECT NO. 1 LOWER INSTRUMENT PANEL AIRBAG ASSEMBLY (Vehicle not involved in collision)

(a) Perform a diagnostic system check.

Click here

(b) Check for any defects with the No. 1 lower instrument panel airbag assembly installed in the vehicle.

HINT:

Defects include the following:

  • Cuts
  • Small cracks
  • Significant discoloration

OK:

There are no defects.

If any defect is found, replace the No. 1 lower instrument panel airbag assembly with a new one.

2. INSPECT NO. 1 LOWER INSTRUMENT PANEL AIRBAG ASSEMBLY (Vehicle not involved in collision and airbag not deployed)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the No. 1 lower instrument panel airbag assembly removed from the vehicle for defects.

HINT:

Defects include the following:

  • Cuts
  • Small cracks
  • Significant discoloration
  • Cracks or other damage to the connector
  • Deformation or cracks on the No. 1 instrument panel reinforcement sub-assembly, the instrument panel on the No. 3 roof reinforcement sub-assembly, the No. 1 lower instrument panel airbag door, the lower center instrument panel finish panel, or the fuse box opening cover

OK:

There are no defects.

If a defect is detected, replace the No. 1 lower instrument panel airbag assembly, the No. 1 instrument panel reinforcement sub-assembly, the instrument panel on the No. 3 roof reinforcement sub-assembly, the No. 1 lower instrument panel airbag door, the lower center instrument panel finish panel, or the fuse box opening cover with a new one.