Supplemental Restraint Systems

Inspection On Vehicle

~2min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the removal and installation procedures correctly for the horn button assembly.

PROCEDURE

1. INSPECT HORN BUTTON ASSEMBLY (for vehicle not involved in a collision)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the horn button assembly for defects while it is installed on the vehicle.

HINT:

Defects include the following:

  • Cuts on the surface or in the grooves
  • Small cracks on the surface or in the grooves
  • Significant discoloration on the surface or in the grooves

OK:

There are no defects.

If a defect is found, replace the horn button assembly with a new one.

2. INSPECT HORN BUTTON ASSEMBLY (for vehicle involved in a collision but airbag not deployed)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the horn button assembly for defects while it is removed from the vehicle.

HINT:

Defects include the following:

  • Cuts on the surface or in the grooves
  • Small cracks on the surface or in the grooves
  • Significant discoloration on the surface or in the grooves
  • Cracks or other damage to the connector
  • Deformation of steering wheel assembly
  • Deformation of horn button assembly mounting surface
  • Interference or uneven clearance between the horn button assembly and the steering wheel assembly when a new horn button assembly is installed on the steering wheel assembly

OK:

There are no defects.

If a defect is found, replace the horn button assembly or the steering wheel assembly with a new one.