Front Suspension
Inspection On Vehicle
In this manual: Front Suspension
~1min read
INSPECTION ON VEHICLE
PROCEDURE
1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY
(a) Check that there is no play. (1) Raise the vehicle. (2) Move the front suspension lower arm sub-assembly No. 1 up and down by hand with a force of at least 294 N (30 kgf) to check that there is no play in the front lower ball joint assembly. HINT: If the front lower ball joint assembly is loose, replace it with a new one. |
![]() |
Was this page helpful?
