Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE WIPER AND WASHER SYSTEM (w/ Rear Wiper System)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Select the setting by referring to the table below.
WiperTester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
R Wiper Stop Function at Back Door/Trunk Lid Open |
Function to enable the back door open linked rear wiper suspend function |
Available |
$00:Enable,$01:Disable |
Main body ECU (Multiplex network body ECU) |
Rear Wiper Washer Function |
Function to enable the rear washer linked rear wiper operation function |
Available |
$00:Enable,$01:Disable |
Main body ECU (Multiplex network body ECU) |
Rear Wiper with Reverse Setting |
Function to enable the R shift position linked rear wiper operation function |
Not Available |
$00:Disable,$02:1 time,$03:Continuation |
Main body ECU (Multiplex network body ECU) |
HINT:
Changes to the customize settings will not be applied until the ignition switch is turned off then ON.