System Description
SYSTEM DESCRIPTION
FRONT WIPER CONTROL FUNCTION
Control/Function | Description |
|---|---|
INT function*1 |
Operates the wipers intermittently at LO speed when the front wiper switch is in the INT position. |
MIST function |
Operates the front wipers in LO when the front wiper switch is held in the MIST position. |
Intermediate position return function |
Resumes wiper operation according to the operation of the front wiper switch or washer switch when the wipers are stopped in any position other than the lower reverse position. |
Vehicle speed sensing type adjustable intermittent wiper control*2 |
Controls the delay of the front wipers when the front wiper switch is in the INT position. HINT:
|
Vehicle speed linked wiper operation control*2 |
Operates the wipers as follows when the vehicle is stopped.
HINT:
|
Protection mode |
Suspends wiper operation if the wipers are prevented from operating for 10 seconds or more, in order to protect the wiper and washer system. |
- *1: w/o Intermittent Time Adjustment Switch
- *2: w/ Intermittent Time Adjustment Switch
REAR WIPER CONTROL FUNCTION (w/ Rear Wiper System)
Control/Function | Description |
|---|---|
Back door open linked wiper suspend function |
Suspends rear wiper operation when the back door is opened. HINT:
|
R shift position auto rear wiper operation function |
Operates the rear wiper 0.4 seconds after the shift lever is moved to R when the front wipers are operating. HINT:
|
WASHER CONTROL FUNCTION
Control/Function | Description |
|---|---|
Front washer cooperation |
NOTICE: If the washer switch is held in the Fr WASH position for approximately 40 seconds or more, operation of the windshield washer motor and pump assembly is stopped to prevent burnout, and the front wipers are returned to the park position. |
Rear washer cooperation*1 |
NOTICE: If the washer switch is held in the Rr WASH position for approximately 40 seconds or more, operation of the windshield washer motor and pump assembly is stopped to prevent burnout, and the rear wiper is returned to the park position. HINT: This function is operable when its customize setting is set to "Available". |
Drip prevention wiper function |
Approximately 3 seconds after front washer cooperation completes, operates the wipers for 1 cycle to remove any remaining washer fluid. HINT: This function only operates when the vehicle is stopped or is being driven at a very low speed (below approximately 7 km/h). |
Washer fluid level low warning*2 |
Displays "Windshield Washer Fluid Low" on the multi-information display in the combination meter assembly when the washer fluid level is low. |
- *1: w/ Rear Wiper System
- *2: w/ Washer Fluid Level Warning System
.gif)