Vehicle Interior
Engine Immobiliser System Incorrect Assembly (B279C95)
In this manual: Vehicle Interior
~1min read
DESCRIPTION
If an ECM that is incompatible with the immobiliser system is installed, the ECM stores this DTC.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
B279C95 |
Engine Immobiliser System Incorrect Assembly |
An ECM that is incompatible with immobiliser system is installed. |
ECM |
DTC Output Confirmation Operation:
|
Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
Engine cannot be started |
- |
DTC No. | Data List and Active Test |
|---|---|
B279C95 |
- |
NOTICE:
- If the ECM is replaced, refer to Registration.
Click here
.gif)
- After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
PROCEDURE
REPLACE ECM
(a) Replace the ECM.
Click here
![]()
| NEXT | END (ECM WAS DEFECTIVE) |
Was this page helpful?