Unmatched Encryption Code (B2794)
DESCRIPTION
This DTC is stored when a door control transmitter assembly with an incomplete key ID code is inserted into the ignition key cylinder.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
B2794 |
Unmatched Encryption Code |
A door control transmitter assembly with an incomplete key ID code is inserted into the ignition key cylinder (1 trip detection logic*). |
Door control transmitter assembly |
DTC Output Confirmation Operation:
|
- *: Only output while a malfunction is present.
Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
Engine cannot be started |
- |
DTC No. | Data List and Active Test |
|---|---|
B2794 |
- |
NOTICE:
- If the door control transmitter assembly is replaced, refer to Registration.
Click here
.gif)
- After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
PROCEDURE
REGISTRATION OF TRANSMITTER ID
(a) Register the door control transmitter assembly which caused the DTC to be stored.
|
CLEAR DTC
(a) Clear the DTCs.
Body Electrical > Immobiliser > Clear DTCs
|
CHECK FOR DTC
(a) Perform "DTC Output Confirmation Operation" procedure.
(b) Check for DTCs.
Body Electrical > Immobiliser > Trouble CodesResult | Proceed to |
|---|---|
B2794 is not output |
A |
B2794 is output |
B |
| A | END (DOOR CONTROL TRANSMITTER ASSEMBLY WAS NOT REGISTERED) |
| B | REPLACE DOOR CONTROL TRANSMITTER ASSEMBLY THAT DTC IS OUTPUT |