Vehicle Interior

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY LH

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

O30-1 - Switch body

Not pushed (ON)

Below 1 Ω

O30-1 - Switch body

Pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the front door courtesy light switch assembly LH.

*a

Component without harness connected

(Front Door Courtesy Light Switch Assembly LH)

*b

Switch Body

2. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY RH

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

O32-1 - Switch body

Not pushed (ON)

Below 1 Ω

O32-1 - Switch body

Pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the front door courtesy light switch assembly RH.

*a

Component without harness connected

(Front Door Courtesy Light Switch Assembly RH)

*b

Switch Body