Vehicle Interior

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY LH

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

O31-1 - Switch body

Not pushed (ON)

Below 1 Ω

O31-1 - Switch body

Pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the rear door courtesy light switch assembly LH.

*a

Component without harness connected

(Rear Door Courtesy Light Switch Assembly LH)

*b

Switch Body

2. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

O34-1 - Switch body

Not pushed (ON)

Below 1 Ω

O34-1 - Switch body

Pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the rear door courtesy light switch assembly RH.

*a

Component without harness connected

(Rear Door Courtesy Light Switch Assembly RH)

*b

Switch Body