Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 1 COOLER THERMISTOR |
88625 |
- |
- |
|
2 |
NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
88501 |
- |
- |
|
3 |
COOLER EXPANSION VALVE |
88515 |
- |
- |
|
4 |
COOLER PIPE GROMMET |
88897K |
- |
- |
- |
5 |
HEATER RADIATOR UNIT SUB-ASSEMBLY |
87107A |
- |
- |
- |
6 |
HEATER CLAMP |
87124B |
- |
- |
- |
7 |
HEATER PIPE GROMMET |
88897M |
- |
- |
- |
8 |
NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
87050C |
- |
- |
|
9 |
AIR CONDITIONING HARNESS ASSEMBLY |
82210K |
- |
- |
- |
10 |
BLOWER ASSEMBLY |
87130D |
- |
- |
- |
*1 |
UPPER HEATER CASE |
- |
- |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
![]() |
for Gasoline Model: Compressor oil ND-OIL 12 or equivalent for HEV Model: Compressor oil ND-OIL 11 or equivalent |
- |
- |
PROCEDURE
1. INSTALL NO. 1 COOLER THERMISTOR
*a |
Securing Part |
*b |
Sensor Part |
(1) Install the No. 1 cooler thermistor as shown in the illustration.
Installation Position:
Part | Length | Part | Length |
|---|---|---|---|
A |
45 to 55 mm (1.77 to 2.17 in.) |
B |
23 to 27 mm (0.906 to 1.06 in.) |
C |
54.4 mm (2.14 in.) |
D |
61.1 mm (2.41 in.) |
NOTICE:
- Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
- When reusing the No. 1 cooler evaporator sub-assembly, insert the No. 1 cooler thermistor one row next to the one that has been used previously (X in the illustration).
- After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.
- Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
![]() |
Click here |
3. INSTALL COOLER EXPANSION VALVE
![]() |
Click here |
4. INSTALL COOLER PIPE GROMMET
5. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
6. INSTALL HEATER CLAMP
7. INSTALL HEATER PIPE GROMMET
8. INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
![]() |
Click here |
9. INSTALL AIR CONDITIONING HARNESS ASSEMBLY
10. INSTALL BLOWER ASSEMBLY
Click here ![]()
.png)
.png)
.png)
.gif)
.png)
.png)