General
License Plate Light Bulb
In this manual: General
~1min read
Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
LICENSE PLATE LIGHT LENS |
- |
- |
- |
|
2 |
LICENSE PLATE LIGHT BULB |
81270B |
- |
- |
- |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE LICENSE PLATE LIGHT LENS
(1) Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the license plate light lens as shown in the illustration.
2. REMOVE LICENSE PLATE LIGHT BULB
Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
LICENSE PLATE LIGHT BULB |
81270B |
- |
- |
- |
2 |
LICENSE PLATE LIGHT LENS |
- |
- |
- |
- |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL LICENSE PLATE LIGHT BULB
2. INSTALL LICENSE PLATE LIGHT LENS
Was this page helpful?
.png)
.png)
.png)
.gif)
.png)
.png)
.png)