General

M20a-fks Auxiliary Battery

~1min read
0102030405015.411N·mlb·ft
Tightening torque found on this page

Installation

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

AUXILIARY BATTERY

-

-

-

-

2

NO. 2 BATTERY CLAMP

74482

-

-

-

3

POSITIVE AUXILIARY BATTERY TERMINAL

-

-

-

4

FUSIBLE LINK COVER

-

-

-

-

5

NEGATIVE AUXILIARY BATTERY TERMINAL

-

-

-

-

6

INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

-

-

-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)

N*m (kgf*cm, ft.*lbf): Specified torque

NOTICE:

When replacing the battery, use a new battery of the same dimensions and same capacity or more from the same class at a 20-hour rate.

PROCEDURE

1. INSTALL AUXILIARY BATTERY

2. INSTALL NO. 2 BATTERY CLAMP

Torque:

15,4 N·m {157 kgf·cm, 11 ft·lbf}

3. CONNECT POSITIVE AUXILIARY BATTERY TERMINAL

*a

Locked Position

*b

Engage here

Install in this Direction

-

-

(1) Connect the cable to the positive (+) battery terminal.

(2) Engage the spring assembly as shown in the illustration.

(3) Tighten the nut.

Torque:

5,6 N·m {57 kgf·cm, 50 in·lbf}

4. INSTALL FUSIBLE LINK COVER

5. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

6. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function thatcompletes learning when the respective system is used.

Click here