Rear Side Marker Light Bulb
Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR COMBINATION LIGHT ASSEMBLY |
81560 |
- |
- |
|
2 |
REAR SIDE MARKER LIGHT SOCKET |
- |
- |
- |
- |
3 |
REAR SIDE MARKER LIGHT BULB |
81550S |
- |
- |
- |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. SEPARATE REAR COMBINATION LIGHT ASSEMBLY
*a |
Pin |
*b |
Guide |
![]() |
Remove in this Direction |
- |
- |
(1) Apply protective tape around the rear combination light assembly as shown in the illustration.
(2) Remove the 2 screws.
(3) Disengage the pin and guide to separate the rear combination light assembly as shown in the illustration.
2. REMOVE REAR SIDE MARKER LIGHT SOCKET
![]() |
Remove in this Direction |
- |
- |
3. REMOVE REAR SIDE MARKER LIGHT BULB
Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR SIDE MARKER LIGHT BULB |
81550S |
- |
- |
- |
2 |
REAR SIDE MARKER LIGHT SOCKET |
- |
- |
- |
- |
3 |
REAR COMBINATION LIGHT ASSEMBLY |
81560 |
- |
- |
- |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR SIDE MARKER LIGHT BULB
2. INSTALL REAR SIDE MARKER LIGHT SOCKET
3. INSTALL REAR COMBINATION LIGHT ASSEMBLY
.png)
.png)
.png)
.gif)
.png)
.png)
.png)
.png)