Automatic transmission / trans

Floor shift cable transmission control select

18steps
~108min
4/5difficulty
Done 0 of 18
Replacement Hint

: components:

1. Remove air conditioner unit assy Hint

: refer to the instructions for removal of the air conditioner unit assy.

2. Separate air bag sensor assy center
  1. remove the 3 bolts, separate the airbag sensor assy center.
3. Remove exhaust pipe assy 4. Remove front floor heat insulator no.1
  1. remove the 3 nuts and heat insulator no.1.
5. Remove floor shift cable transmission control select
Toyota Corolla.  Remove floor shift cable transmission control select
  1. Remove the clip and washer, separate the top of the select cable from the transaxle.
  2. remove the clip, separate the select cable from the control cable bracket.
    Toyota Corolla.  Remove floor shift cable transmission control select
  3. Remove the 2 nuts and clamp.
    Toyota Corolla.  Remove floor shift cable transmission control select
  4. Using a screwdriver, release the cable outer spring.
  5. turn the lock, separate the select cable from the shift lever retainer.
    Toyota Corolla.  Remove floor shift cable transmission control select
  6. Separate the end of the select cable from the shift lever assy.
    Toyota Corolla.  Remove floor shift cable transmission control select
  7. Remove the 2 bolts and retainer from the floor.
  8. pull out the control cable assy from the floor.
    Toyota Corolla.  Remove floor shift cable transmission control select
  9. Remove the retainer from the grommet.
  10. remove the select cable from the grommet.
6. Install floor shift cable transmission control select
Toyota Corolla. Install floor shift cable transmission control select
  1. Install the select cable to the grommet.
  2. install the retainer to the grommet.
Notice

: fit 4 projections of the grommet into 4 holes of the retainer.

Toyota Corolla. Install floor shift cable transmission control select
  1. Install the control cable assy with the 2 bolts.

    Torque: 5.0 Nvm (51 Kgf·cm, 44 in.Vlbf)

    Toyota Corolla. Install floor shift cable transmission control select
  2. Connect the end of the select cable to the shift lever assy.
    Toyota Corolla. Install floor shift cable transmission control select
  3. Connect the select cable to the retainer of shift lever assy, turn the lock.
Notice

: the projecting part of the lock should face upward when the select cable is installed.

  • install the cable outer spring to the lock.
  • Notice

    : make sure that after installation the cable outer spring is moved to the place shown in the illustration.

    Toyota Corolla. Install floor shift cable transmission control select
    1. Install the clamp with the 2 nuts.

      Torque: 5.0 Nvm (51 Kgf·cm, 44 in.Vlbf)

      Toyota Corolla. Install floor shift cable transmission control select
    2. Connect the select cable to the control cable bracket, install a new clip.
    3. connect the select cable to the transaxle, install the washer and clip.
    7. Install front floor heat insulator no.1
    1. install the heat insulator no.1 With the 3 nuts.
    8. Install exhaust pipe assy 9. Connect air bag sensor assy center
    1. install the airbag sensor assy center with the 3 bolts.

      Torque: 17.5 Nvm (178 Kgf·cm, 13 ft·lbf)

    10. Inspect srs warning light

    Test yourself

    A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.