Toyota Land Cruiser Quiz
Body Electrical

Ignition switch and key unlock warning switch

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. INSPECT IGNITION SWITCH CONTINUITY

INSPECT IGNITION SWITCH CONTINUITY
INSPECT IGNITION SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

2. INSPECT IGNITION KEY ILLUMINATION OPERATION

INSPECT IGNITION KEY ILLUMINATION OPERATION

Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the indicator light lights up.

If operation is not as specified, replace the switch.

3. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY

INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY
INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

Connect the switch connector and inspect the connector on wire harness side from the back side, as shown.

LOCATION

LOCATION

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.