Toyota Land Cruiser Quiz
Body Electrical

Turn signal and hazard warning system

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

INSPECTION

1. INSPECT TURN SIGNAL SWITCH CONTINUITY

INSPECT TURN SIGNAL SWITCH CONTINUITY
INSPECT TURN SIGNAL SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

2. INSPECT HAZARD WARNING SWITCH CONTINUITY

INSPECT HAZARD WARNING SWITCH CONTINUITY
INSPECT HAZARD WARNING SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

3. INSPECT TURN SIGNAL FLASHER CIRCUIT

Inspect turn signal flasher circuit

Disconnect the connector from the combination switch and inspect the connector on the wire harness side, as shown.

Inspect turn signal flasher circuit

If circuit is as specified, replace the relay.

If circuit is not as specified, inspect the circuits connected to other parts.

LOCATION

LOCATION

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.