Toyota RAV4 Quiz
2Az-fe charging

Installation

In this manual: 2Az-fe charging
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
11steps
~81min
5/5difficulty
3special tools
Done 0 of 11
  1. Install water pump assembly
Toyota RAV4. Install water pump assembly

  1. Remove any old seal packing material from the contact surface.
  2. Apply a continuous line of seal packing as shown in the illustration.
Seal packing: toyota genuine seal parking black, three bond 1207b or equivalent Standard seal diameter: 2.2 To 2.5 Mm (0.09 To 0.10 In.) Notice:
  • Remove any oil from the contact surface.
  • The parts must be set within 3 minutes after applying seal packing. Otherwise, the material must be removed and reapplied.
  1. Install the water pump and clamp bracket with the 4 bolts and 2 nuts.
Torque: 9.0 N*m (92 kgf*cm, 80 in.*Lbf)
  • Install the wire of the crankshaft position sensor onto the clamp bracket.
  • Install the clamp of the crankshaft position sensor onto the water pump.
    1. Install water pump pulley
    Toyota RAV4. Install water pump pulley

    1. Using sst, install the water pump pulley with the 4 bolts.
    Sst 09960-10010 (09962-01000, 09963-00700) torque: 26 n*m (265 kgf*cm, 19 ft.*Lbf)
    1. Install generator assembly (see page ch-15)
    2. Install fan and generator v belt (see page em-7)
    3. Install front suspension member reinforcement rh (see page em-7)
    4. Connect cable to negative battery terminal
    5. Add engine coolant (see page co-6)
    6. Check for engine coolant leaks (see page co-1)
    7. Install radiator support opening cover
    8. Install front fender apron rh
    9. Install no. 1 Engine under cover
    Components
    Toyota RAV4. Components

    Toyota RAV4. Components

    Test yourself

    A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.