Toyota RAV4 Quiz
2Az-fe engine mechanical

Removal

In this manual: 2Az-fe engine mechanical
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
8steps
~48min
2/5difficulty
Done 0 of 8
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove generator assembly
  2. Remove the generator assembly from the vehicle (see page ch-9).
  3. Remove crankshaft position sensor
    Toyota RAV4. Remove crankshaft position sensor

  1. Disconnect the sensor connector.
  2. Remove the connector clamp.
  3. Remove the wire harness from the wire harness clamp bracket.
  4. Remove the wire harness clamp.
  5. Remove the bolt and sensor.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.