2Az-fe charging

Removal

8steps
~48min
2/5difficulty
Done 0 of 8
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove fan and generator v belt
  2. Remove the belt (see page em-6).
  3. Remove generator assembly
    Toyota RAV4. Remove generator assembly

  1. Disconnect the generator connector.
  2. Remove the terminal cap.
  3. Remove the nut and disconnect the generator wire.
  4. Remove the bolt and wire harness clamp bracket.
  5. Remove the wire harness clamps.
    Toyota RAV4. Remove generator assembly

  1. Remove the 2 bolts and generator.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.