Toyota RAV4 Quiz
2Az-fe charging

Replacement

In this manual: 2Az-fe charging
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
2steps
~32min
4/5difficulty
4special tools
Done 0 of 2
  1. Replace generator drive end frame bearing
Toyota RAV4. Replace generator drive end frame bearing

  1. Remove the 4 screws and bearing retainer.
  2. Using sst and a hammer, tap out the bearing.
    Toyota RAV4. Replace generator drive end frame bearing

Sst 09950-60010 (09951-00250), 09950-70010 (09951-07100)
  1. Using sst and a press, press in a new bearing.
Toyota RAV4. Replace generator drive end frame bearing

Sst 09950-60010 (09951-00250), 09950-70010 (09951-07100)
  1. Install the bearing retainer with the 4 screws.
Toyota RAV4. Replace generator drive end frame bearing

Torque: 2.3 N*m (23 kgf*cm, 20 in.*Lbf)

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.