Reassembly

1. INSTALL LIGHT CONTROL ECU (DISCHARGE HEADLIGHT)

1. 1
   Install a new headlight leveling motor base packing.
2. 2
   Install the headlight leveling motor assembly as shown in the illustration.

   

3. 3
   Connect the connector with the claw

   

4. 4
   Install the light control ECU with the 2 screws.
5. 5
   Install a new headlight gasket.
6. 6
   Install the headlight cover with the 4 screws.

2. INSTALL FRONT SIDE MARKER LIGHT BULB

1. 1
   Install the side marker light bulb to the side marker light socket
2. 2
   Turn in the direction indicated by the arrow and install the side marker light bulb and side marker light socket as a unit.

3. INSTALL FRONT TURN SIGNAL LIGHT BULB

1. 1
   Install the front turn signal light bulb to the front turn signal light socket.

   

2. 2
   Turn in the direction indicated by the arrow and install the front turn signal light bulb and front turn signal light socket as a unit.

4. INSTALL NO. 2 HEADLIGHT BULB

1. Turn in the direction indicated by the arrow and install the No.2 headlight bulb.

5. INSTALL DISCHARGE HEADLIGHT BULB (DISCHARGE HEADLIGHT)

1. 1
   Install the discharge headlight bulb with the set spring as shown in the illustration.

   

2. 2
   Turn in the direction indicated by the arrow and install the socket.

   

3. 3
   Turn in the direction indicated by the arrow and install the headlight socket cover.

6. INSTALL NO. 1 HEADLIGHT BULB (HALOGEN HEADLIGHT)

1. Turn in the direction indicated by the arrow and install the No.1 headlight bulb.