Control Module Communication Bus "A" Off (U0073,U0123,U0129,U0155)
In this manual: Brake
~2min read
DESCRIPTION
The trailer brake control ECU (brake control with bracket relay) receives signals from the skid control ECU (brake actuator assembly), yaw rate and acceleration sensor (airbag sensor assembly) and combination meter assembly via CAN communication.
DTC No.
Detection Item
INF Code
DTC Detection Condition
Trouble Area
U0073
Control Module Communication Bus "A" Off
-
Bus off condition continues for 1 second or more
CAN communication system
U0123
Lost Communication with Yaw Rate Sensor Module
-
With a vehicle speed of 6 km/h, the system is continuously unable to receive data from the yaw rate and acceleration sensor (airbag sensor assembly) for 1 second or more
CAN communication system
Trailer brake control ECU (Brake control with bracket relay)
Yaw rate and acceleration sensor (airbag sensor assembly)
U0129
Lost Communication with Brake System Control Module
-
The skid control ECU (brake actuator assembly) is continuously unable to receive data from the brake actuator assembly (skid control ECU) for 1 second or more.
CAN communication system
Trailer brake control ECU (Brake control with bracket relay)
Skid control ECU (Brake actuator assembly)
U0155
Lost Communication With Instrument Panel Cluster (IPC) Control Module
-
With a vehicle speed of 6 km/h, the system is continuously unable to receive data from the combination meter assembly for 5 seconds or more
CAN communication system
Trailer brake control ECU (Brake control with bracket relay)
Combination meter assembly
PROCEDURE
CHECK DTC
(a) Clear the DTCs.
Click here
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON.
(d) Check if the same DTC is output.
Click here
HINT:
If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor malfunction DTC.