Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
Slider Switch Position Sensor Voltage #1 |
Slider switch position sensor voltage #1 / min.: 0 V, max.: 5 V |
Actual manual trailer brake output slider position |
When the manual trailer brake output slider is operated from the free (0%) condition, the value gradually changes from 0 V to 5 V. |
Slider Switch Position Sensor Voltage #2 |
Slider switch position sensor voltage #2 / min.: 0 V, max.: 5 V |
Actual manual trailer brake output slider position |
When the manual trailer brake output slider is operated from the free (0%) condition, the value gradually changes from 5 V to 0 V. |
Gain Rocker Switch (+) |
GAIN (+) selection button / ON or OFF |
ON: GAIN (-) selection button OFF
OFF: GAIN (+) selection button ON |
- |
Gain Rocker Switch (-) |
GAIN (-) selection button / ON or OFF |
ON: GAIN (-) selection button OFF
OF: GAIN (-) selection button ON |
- |
Status of Master Cylinder Pressure Sensor Output |
Status of master cylinder pressure sensor output / Valid or Invalid |
Valid |
- |
Status of Master Cylinder Pressure Sensor |
Status of master cylinder pressure sensor / Normal or Abnorm |
Normal |
- |
Status of Brake ECU Communication |
Status of skid control ECU (brake actuator assembly) communication / Valid or Invalid |
Valid |
- |
Status of Meter ECU Communication |
Status of combination meter assembly communication / Valid or Invalid |
Valid |
- |
Status of G Sensor Communication |
Status of acceleration sensor (airbag sensor assembly) communication / Valid or Invalid |
Valid |
- |
Master Cylinder Pressure Value |
Master cylinder pressure reading / Min.: 0.00 MPa, Max.: 20.48 MPa |
Brake pedal operated: Proportional to pedal force
Brake pedal released: 0.00 to 1.76 MPa |
- |
Status of Hill-Start Assist Control (HAC) |
Status of hill-start assist control / OFF or ON |
OFF: Hill-start assist control not operating
ON: Hill-start assist control operating |
- |
Status of Trailer Sway Control (TSC) Operation |
Status of trailer sway control operation / Inactive or Active |
Inactive: Trailer sway control not operating
Active: Trailer sway control operating |
- |
Stop Light Switch |
Status of stop light switch / OFF or ON |
OFF: Brake pedal released
ON: Brake pedal depressed |
- |
Status of Stop Light Switch |
Status of stop light switch assembly / Normal or Abnormal |
Normal |
- |
Status of Stop Light Relay |
Status of stop light control relay (VSC ACC) / Normal or Abnormal |
Normal |
- |
Status of Vehicle Speed Signal |
Status of vehicle speed signal / Valid or Invalid |
Valid |
- |
Mounting Information of Yaw/G Sensor |
Installation information of yaw rate and acceleration sensor (airbag sensor assembly) / Connecter Vehicle Front Side or Connecter Vehicle Rear Side |
Connector Vehicle Rear Side: Yaw rate and acceleration sensor (airbag sensor assembly) connector is located on side facing rear of vehicle |
- |
Status of G Sensor 0 Point Calibration |
Status of acceleration sensor zero point calibration / Complete or Incomplete |
Complete |
- |
Status of Yaw/G Sensor Power Supply Range |
Status of yaw rate and acceleration sensor (airbag sensor assembly) supply range / Valid or Invalid |
Valid |
- |
Status of G Sensor Communication |
Status of acceleration sensor (airbag sensor assembly) communication / Normal or Abnormal |
Normal |
- |
Status of G Sensor Output |
Status of acceleration sensor (airbag sensor assembly) output / Valid or Invalid |
Valid |
- |
Status of ABS Control (FR Wheel) |
Status of front wheel RH ABS control / OFF or ON |
OFF: Control not operating
ON: Control operating |
- |
Status of ABS Control (FL Wheel) |
Status of front wheel LH ABS control / OFF or ON |
OFF: Control not operating
ON: Control operating |
- |
Status of ABS Control (RR Wheel) |
Status of rear wheel RH ABS control / OFF or ON |
OFF: Control not operating
ON: Control operating |
- |
Status of ABS Control (RL Wheel) |
Status of rear wheel LH ABS control / OFF or ON |
OFF: Control not operating
ON: Control operating |
- |
G Sensor Value |
Acceleration sensor (airbag sensor assembly) reading / Min.: -18.375 m/s2, Max.: 18.387 m/s2 |
- |
- Displays a negative value during deceleration and a positive value during acceleration
- During deceleration/acceleration: Changes continuously
|
Vehicle Speed |
Maximum wheel speed sensor reading / Min.: 0 km/h, Max.: 328 km/h |
Vehicle stopped: 0 km/h |
When driving at constant speed: No large fluctuations |
TBC Output Voltage |
Trailer brake output voltage / min.: 0.000 V, max.: 18.000 V |
- |
Changes according to brake pedal and manual trailer brake output slider operation when a trailer is connected |
Command Value Trailer Brake Output |
Trailer brake output intensity / min.: 0%, max.: 100% |
- |
Changes according to brake pedal and manual trailer brake output slider operation when a trailer is connected |
Trailer Brake Light |
Trailer brake light / ON or OFF |
OFF: Always |
No trailer brake light on the combination meter assembly |
Battery Voltage |
Battery voltage / min.: 0.000 V, max.: 18.000 V |
11 to 14 V |
- |
Gain Value |
Gain value / min.: 0.0, max.: 10.0 |
Gain value set when GAIN (+/-) selection button is operated |
- |
Trailer Brake Type |
Trailer brake type / Noconnection, Electric (Trailer Lightweight Type), Electric Over Hydraulic (Trailer Lightweight Type), Electric (Trailer Heavyweight Type), Electric Over Hydraulic (Trailer Heavyweight Type) or TBC OFF |
Condition of selected trailer brake type |
HINT:
- Electric (Trailer Lightweight Type): Electric (0-4999lb)
- Electric Over Hydraulic (Trailer Lightweight Type): Electric-Over-Hydraulic (0-4999lb)
- Electric (Trailer Heavyweight Type): Electric (5000+lb),
- Electric Over Hydraulic (Trailer Heavyweight Type): Electric-Over-Hydraulic (5000+lb)
|
Status of Manual Brake Slider Stuck |
Status of manual trailer brake output slider/ Not Stuck or Stuck |
Not Stuck |
- |
Status of Manual Brake Slider Circuit |
Status of manual trailer brake output slider circuit / Normal or Open or Short |
Normal |
- |
Manual Brake Slider Sensor Output Value Comparison Result |
Manual trailer brake output slider sensor output valve comparison result / Normal or Abnormal |
Normal |
- |
Status of Gain Rocker Switch (+) Stuck |
Status of GAIN (+) selection button stuck / Not Stuck or Stuck |
Not Stuck |
- |
Status of Gain Rocker Switch (-) Stuck |
Status of GAIN (-) selection button stuck / Not Stuck or Stuck |
Not Stuck |
- |
Detail Code |
Detail code / Min.: 0, Max.: 255 |
- |
Number of information codes (INF code) output is displayed |
The Number of DTCs |
Number of DTC recorded / Min.: 0, Max.: 255 |
- |
- |