Brake
Dtc Check / Clear
In this manual: Brake
~1min read
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR
(a) Check for DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Read the DTCs following the prompts on the Techstream. Enter the following menus: Chassis / Trailer Brake Controller / Trouble Codes.
(b) Clear the DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Operate the Techstream to clear the codes. Enter the following menus: Chassis / Trailer Brake Controller / Trouble Codes.
(5) According to the display on the Techstream, select the trouble code data display with the clear button.
Was this page helpful?