Brake
How To Proceed With Troubleshooting
|
HINT:
*: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| NEXT |
 |
|
CUSTOMER PROBLEM ANALYSIS
(a) Interview the customer and confirm the problem.
Click here 
| NEXT |
 |
|
CHECK DTC AND FREEZE FRAME DATA*
(a) Check and record DTCs and Freeze Frame Data.
- for DTC Check / Clear: Click here

- for Freeze Frame Data: Click here

(b) Clear the DTCs and Freeze Frame Data.
- for DTC Check / Clear: Click here

- for Freeze Frame Data: Click here

(c) Reconfirm the DTCs.
(1) Reconfirm the DTCs based on the recorded DTCs.
Click here 
HINT:
- When a DTC is output, refer to the following.
Click here 
- When DTCs indicating a CAN communication system malfunction are output, first troubleshoot and repair the CAN communication system.
Click here 
Result | Proceed to |
DTC is output |
A |
DTC is not output (Problem symptom does not occur) |
B |
DTC is not output (Problem symptom occurs) |
C |
| B |
 |
GO TO STEP 5 |
| C |
 |
GO TO STEP 6 |
| A |
 |
|
DIAGNOSTIC TROUBLE CODE CHART
(a) Proceed to Diagnostic Trouble Code Chart.
Click here 
| NEXT |
 |
GO TO STEP 7 |
SYMPTOM SIMULATION
(a) Proceed to How to Proceed with Troubleshooting.
Click here
| NEXT |
 |
|
CIRCUIT INSPECTION*
| NEXT |
 |
|
IDENTIFICATION OF PROBLEM
| NEXT |
 |
|
REPAIR OR REPLACEMENT
| NEXT |
 |
|
CONFIRMATION TEST*
| NEXT |
 |
END |
|
Was this page helpful?