(a) Whenever a lane departure alert system is stored, the forward recognition camera stores the current vehicle state (ECU and sensor information) as Freeze Frame Data.
CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / LKA/LDA / Trouble Codes.
(e) According to the Techstream display, select a DTC that stored freeze frame data.
(f) Read the freeze frame data recorded when the DTC was stored.
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
Load System
Type of system vehicle is equipped with/ LDA or LKA
LDA or LKA
LDA: Equipped with lane departure alert system
LKA: Equipped with lane keeping assist system
LDA Control
Control status of lane departure alert system
Prohibit or Permit
Prohibit: Control prohibited
Permit: Control permitted
-
Turn Signal Switch (Right)
Turn signal switch (right) status
OFF or ON
ON: Turn signal light switch on (right)
OFF: Turn signal light switch off
-
Turn Signal Switch (Left)
Turn signal switch (left) status
OFF or ON
ON: Turn signal light switch on (left)
OFF: Turn signal light switch off
-
Skid Control Buzzer Demand
Lane departure alert buzzer demand status
OFF or ON
ON: Lane departure alert buzzer operating
OFF: Lane departure alert buzzer not operating
-
Vehicle Information (2WD/4WD)
Vehicle information (drivetrain) stored in forward recognition camera
2WD, 4WD or Unknown
2WD: for 2WD
4WD: for 4WD
Unknown: Vehicle information not confirmed
Vehicle Information (Conv/HV)
Vehicle information (conventional/hybrid) stored in forward recognition camera