Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
When replacing the combination meter assembly, make sure to replace it with a new one.
Lane Departure Alert System
Symptom
Suspected Area
Link
Lane departure alert system does not operate
Power source circuit
Lane departure alert main switch circuit
CAN communication system
Forward recognition camera
Lane departure alert indicator abnormal (Does not turn on)
Lane departure alert indicator circuit
Lane departure alert main switch circuit
CAN communication system
Combination meter assembly
Forward recognition camera
Lane departure alert indicator abnormal (Remains on)
Lane departure alert indicator circuit
Lane departure alert main switch circuit
CAN communication system
Combination meter assembly
Forward recognition camera
Lane departure alert system is not canceled even when turn signal light switch is operated
Data List / Active Test
(Check turn signal switch signal)
Turn signal light switch circuit
Forward recognition camera
Increase in cases that driver can see line markers but system cannot detect lane markers
Windshield glass is dirty
-
Forward recognition camera is dirty
-
Headlight assemblies are dirty or worn
-
Non-standard suspension is installed
-
Non-standard tires are installed
-
Non-Toyota genuine windshield glass is installed
-
There is a foreign object or foreign matter between the windshield glass and forward recognition camera
-
A sticker or similar item is attached to the area in front of the forward recognition camera
-
Adjust forward recognition camera
Forward recognition camera
Lane departure alert system is operating, but no operation condition is displayed on multi-information display in combination meter assembly
Data List / Active Test
(Check the item LDA Control)
Combination meter assembly
Forward recognition camera
Buzzer does not sound even when lane markers are lost while lane departure warning function is operating