Vehicle Interior
How To Proceed With Troubleshooting
|
HINT:
- Use these procedures to troubleshoot the power window control system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| NEXT |
 |
|
INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| NEXT |
 |
|
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Result | Proceed to |
CAN DTC is not output |
A |
CAN DTC is output |
B |
| A |
 |
|
PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table.
Click here 
Result | Proceed to |
Fault not listed in problem symptoms table |
A |
Fault listed in problem symptoms table |
B |
| B |
 |
GO TO STEP 6 |
| A |
 |
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check.
Click here 
(b) Terminals of ECU.
Click here 
(c) Data List / Active Test.
Click here 
| NEXT |
 |
|
REPAIR OR REPLACEMENT
| NEXT |
 |
|
CONFIRMATION TEST
| NEXT |
 |
END |
|
Was this page helpful?