Vehicle Interior

Installation

~1min read

INSTALLATION

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
  • A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY LH

(a) Connect each connector and attach each clamp.

(b) Attach the guide to set the headlight assembly LH.

(c) Install the bolt and 2 screws.

2. INSTALL FRONT END PANEL LH

3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

4. ADJUST HEADLIGHT AIMING

(See page )