Troubleshooting of the theft deterrent system is based on the premise that the power door lock control system and the wireless door lock control system are operating normally. Accordingly, before troubleshooting the theft deterrent system, first make certain that the power door lock control system and the wireless door lock control system are operating normally.
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Theft Deterrent System
Symptom
Suspected Area
Link
The theft deterrent system cannot be set or canceled
Proceed to "Security indicator light does not blink"
Proceed to "Security Indicator Light Circuit"
ACC signal circuit
IG signal circuit
Door unlock detection switch circuit
Door courtesy switch circuit
Engine hood courtesy switch circuit
Harness or connector
-
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
After a wireless door lock operation is performed with the back door open, the theft deterrent system is not set when the back door is closed
Proceed to "Security indicator light does not blink"
Proceed to "Security Indicator Light Circuit"
ACC signal circuit
IG signal circuit
Door unlock detection switch circuit
Door courtesy switch circuit
Engine hood courtesy switch circuit
Harness or connector
-
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
After a wireless door lock operation is performed with the hood open, the theft deterrent system is not set when the hood is closed
Proceed to "Security indicator light does not blink"
Proceed to "Security Indicator Light Circuit"
ACC signal circuit
IG signal circuit
Door unlock detection switch circuit
Door courtesy switch circuit
Engine hood courtesy switch circuit
Harness or connector
-
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
Security indicator light does not blink when theft deterrent system is set
Proceed to "Security indicator light does not blink"
Proceed to "Security Indicator Light Circuit"
The theft deterrent system becomes set by itself
Check customize setting
Door courtesy switch circuit
Engine hood courtesy switch circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The theft deterrent system cannot be canceled by turning the ignition switch to ON
Main body ECU (multiplex network body ECU)
None of the alarm functions operate or the theft deterrent system can be set even when all necessary conditions are not met
Door unlock detection switch circuit
Door courtesy switch circuit
Engine hood courtesy switch circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The doors are not forcibly locked when the vehicle is in the alarm sounding state
Wireless door lock control system
Door unlock detection switch circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle does not enter the alarm sounding state when the battery is reconnected while the vehicle is in the armed state
Check operation of the security indicator light
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle does not enter the alarm sounding state when the back door is opened while the vehicle is in the armed state
Check operation of the security indicator light
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle does not enter the alarm sounding state when the hood is opened while the vehicle is in the armed state
Check operation of the security indicator light
Engine hood courtesy switch circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle does not enter the alarm sounding state when the doors are unlocked while the vehicle is in the armed state
Door unlock detection switch circuit
Door courtesy switch circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle does not enter the alarm sounding state according to glass breakage sensor operation (w/ Glass Breakage Sensor)
Glass breakage sensor circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The security horn assembly does not operate when the vehicle is in the alarm sounding state
Security horn circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The headlights do not operate when the vehicle is in the alarm sounding state
Lighting system
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The taillights do not operate when the vehicle is in the alarm sounding state
Taillight circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The interior lights do not operate when the vehicle is in the alarm sounding state
Interior light circuit
If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The hazard warning lights do not operate when the vehicle is in the alarm sounding state
Lighting system
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)
The vehicle horn does not operate when the vehicle is in the alarm sounding state
Horn circuit
Hazard warning lights flash even when theft deterrent system is not set
Lighting system
If the symptom(s) still occur after the above areas are inspected and proved to be normal, replace the main body ECU (multiplex network body ECU)