Customize Parameters
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / Door Lock or Illuminated Entry.
(e) Select the setting by referring to the table below.
Door LockTester Display | Default | Content | Setting |
|---|---|---|---|
Unlock Key Twice |
ON |
Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. |
ON or OFF |
Auto Lock |
OFF |
Function that locks all doors when the vehicle speed reaches a certain level. |
ON or OFF |
Auto Lock/Shift |
ON |
Function that locks all doors when the shift lever is moved from P to any position other than P when the engine is running and all doors are closed. |
ON or OFF |
Auto Unlock/Shift |
ON |
Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. |
ON or OFF |
All Unlock/Open-Close |
OFF |
Function that unlocks the other doors when the driver side door is opened within 10 seconds after the ignition switch is turned to off. |
ON or OFF |
Display | Default | Content | Setting |
|---|---|---|---|
Lighting Time |
15 s |
Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the ignition switch from off to ACC or ON.) |
7.5 s, 15 s or 30 s |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.