Customize Parameters
1. CUSTOMIZE FUNCTION WITH TECHSTREAM
NOTICE:
- Be sure to record the current settings before customizing.
- These buzzers should be ON for safe driving. Perform these procedure only if it is necessary to set the buzzer OFF (disabled).
HINT:
The following items can be customized using the Techstream.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Utility / Customize Setting.
(e) Select the setting by referring to the table below.
Combination MeterTester Display | Default | Content | Setting |
|---|---|---|---|
Driver Side Seatbelt Warning Buzzer |
ON |
Function to sound the seat belt warning buzzer |
ON/OFF |
Front Passenger Side Seatbelt Warning Buzzer |
ON |
Function to sound the seat belt warning buzzer |
ON/OFF |
HINT:
This setting is only valid for the buzzer which sounds at 20 km/h or more.
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.