Diagnostic Trouble Code Chart
HINT:
If a trouble code is stored during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
1. CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DIAGNOSTIC TROUBLE CODE CHART
Certification ECU (Smart Key ECU Assembly)DTC Code | Detection Item | Trouble Area | See page |
|---|---|---|---|
B2784 |
Antenna Coil Open / Short |
1. Engine switch 2. Certification ECU (Smart key ECU assembly) |
.gif) |
B278A |
Short to GND in Immobiliser System Power Source Circuit |
1. Wire harness or connector 2. Engine switch 3. Certification ECU (Smart key ECU assembly) |
|
2. ECM DIAGNOSTIC TROUBLE CODE CHART
HINT:
The DTCs for the engine immobiliser system are specified above. If the other codes are output, check the DTC chart for the SFI system.
ECMDTC Code | Detection Item | Trouble Area | See page |
|---|---|---|---|
B2799 |
Engine Immobiliser System Malfunction |
1. Wire harness or connector 2. ECM 3. Certification ECU (Smart key ECU assembly) |
|
B279A |
Theft Deterrent System Communication Line High Fixation |
1. Wire harness or connector 2. ECM 3. Certification ECU (Smart key ECU assembly) |
|
B279C |
Theft Deterrent System Presence Detection |
ECM |
|
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.