INSPECTION PROCEDURE
1. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Check the operation of the door lock motor.
(1) Apply battery voltage and check the operation of the door lock motor.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → Terminal 4 (L)
Battery negative (-) → Terminal 1 (UDL) |
Locks |
Battery positive (+) → Terminal 1 (UDL)
Battery negative (-) → Terminal 4 (L) |
Unlocks |
Text in Illustration
*1 |
Component without harness connected
(Front Door Lock Assembly LH) |
*2 |
Unlock |
*3 |
Lock |
If the result is not as specified, replace the front door lock assembly LH. |
 |
(b) Check the operation of the door unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
7 (E) - 8 (LSSR) |
Locked |
10 kΩ or higher |
7 (E) - 8 (LSSR) |
Unlocked |
Below 1 Ω |
Text in Illustration
*1 |
Component without harness connected
(Front Door Lock Assembly LH) |
*2 |
Unlock |
*3 |
Lock |
If the result is not as specified, replace the front door lock assembly LH. |
 |
(c) Check the operation of the door key lock and unlock switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
7 (E) - 9 (L) |
Locked |
Below 1 Ω |
7 (E) - 9 (L) |
Free |
10 kΩ or higher |
7 (E) - 10 (UL) |
Unlocked |
Below 1 Ω |
7 (E) - 10 (UL) |
Free |
10 kΩ or higher |
Text in Illustration
*1 |
Component without harness connected
(Front Door Lock Assembly LH) |
*2 |
Lock |
*3 |
Unlock |
If the result is not as specified, replace the front door lock assembly LH. |
 |
2. INSPECT FRONT DOOR LOCK ASSEMBLY RH
(a) Check the operation of the door lock motor.
(1) Apply battery voltage and check the operation of the door lock motor.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → Terminal 4 (DL)
Battery negative (-) → Terminal 1 (UL) |
Locks |
Battery positive (+) → Terminal 1 (UL)
Battery negative (-) → Terminal 4 (DL) |
Unlocks |
Text in Illustration
*1 |
Component without harness connected
(Front Door Lock Assembly RH) |
*2 |
Unlock |
*3 |
Lock |
If the result is not as specified, replace the front door lock assembly RH. |
 |
(b) Check the operation of the door unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
7 (LSSR) - 8 (E) |
Locked |
10 kΩ or higher |
7 (LSSR) - 8 (E) |
Unlocked |
Below 1 Ω |
Text in Illustration
*1 |
Component without harness connected
(Front Door Lock Assembly RH) |
*2 |
Unlock |
*3 |
Lock |
If the result is not as specified, replace the front door lock assembly RH. |
 |
?
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?