Installation

INSTALLATION PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

(a) Install the door control receiver with the bolt.

(b) Connect the connector.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT:

Use the same procedure for the RH side and LH side (See page ).

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

4. CONNECT REAR SEAT OUTER BELT ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side (See page ).

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side (See page ).

6. INSTALL RECLINING REMOTE CONTROL BEZEL

HINT:

Use the same procedure for the RH side and LH side (See page ).

7. INSTALL REAR SEAT ASSEMBLY RH

8. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY

9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER RH

10. INSTALL REAR SEAT INNER TRACK BRACKET COVER RH

11. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

12. INSTALL REAR SEAT HEADREST ASSEMBLY RH

13. INSTALL REAR FLOOR FINISH PLATE

14. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

15. INSTALL NO. 1 DECK BOARD

16. INSTALL DECK SIDE TRIM BOX LH

17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

18. INSTALL DECK SIDE TRIM BOX RH

19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

20. INSTALL DECK BOARD ASSEMBLY

21. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

22. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

23. INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure for the RH side and LH side (See page ).