Installation

1. INSTALL UNLOCK WARNING SWITCH

(a) Engage the 2 claws and install the unlock warning switch to the steering column upper bracket.

(b) Extract the key.

(c) Connect the connector.

2. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY

3. INSTALL UPPER STEERING COLUMN COVER

4. INSTALL LOWER STEERING COLUMN COVER

5. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

6. ADJUST SPIRAL CABLE

7. INSTALL STEERING WHEEL ASSEMBLY

8. INSTALL STEERING PAD

9. INSTALL LOWER NO. 3 STEERING WHEEL COVER

10. INSTALL LOWER NO. 2 STEERING WHEEL COVER

11. INSPECT STEERING WHEEL CENTER POINT

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

13. INSPECT STEERING PAD

14. INSPECT SRS WARNING LIGHT

(See page )