Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

3. REMOVE COOL AIR INTAKE DUCT SEAL

4. REMOVE NO. 1 ENGINE UNDER COVER

5. REMOVE NO. 2 ENGINE UNDER COVER

6. DRAIN ENGINE COOLANT

7. REMOVE V-RIBBED BELT

HINT:

See page

8. REMOVE WIRE HARNESS CLAMP BRACKET

9. REMOVE GENERATOR ASSEMBLY

10. DISCONNECT NO. 2 RADIATOR HOSE

11. REMOVE WATER INLET

(a) Remove the 2 nuts and water inlet.

12. REMOVE THERMOSTAT

(a) Remove the thermostat.

(b) Remove the gasket from the thermostat.