Speed Sensor(when Not Using The Engine Support Bridge)

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" (See page ).

2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

5. REMOVE SPEED SENSOR

(a) Disconnect the speed sensor connector.

(b) Remove the 2 bolts and speed sensor from the transmission valve body assembly.

1. INSTALL SPEED SENSOR

(a) Coat the 2 bolts with ATF.

(b) Install the speed sensor to the transmission valve body assembly with the 2 bolts.

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

(c) Connect the speed sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" (See page ).