Transmission Wire(when Not Using The Engine Support Bridge)

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.

(b) Coat the bolt with ATF.

(c) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt. Torque: 11 N·m {112 kgf·cm, 8 ft·lbf}

(d) Engage the clamp.

(e) Connect the 8 shift solenoid valve connectors.

(f) Connect the speed sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" (See page ).

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" (See page ).

2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

5. REMOVE TRANSMISSION WIRE

(a) Disconnect the speed sensor connector.

(b) Disconnect the 8 shift solenoid valve connectors.

(c) Disengage the clamp.

(d) Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.