Transmission Wire(when Using The Engine Support Bridge)

1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring with ATF.

(b) Coat the bolt with ATF.

(c) Install the transmission wire and lock plate to the transmission valve body assembly with the bolt.

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

(d) Engage the clamp.

(e) Connect the 8 shift solenoid valve connectors.

(f) Connect the speed sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

See page

1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

See page

2. REMOVE TRANSMISSION WIRE

(a) Disconnect the speed sensor connector.

(b) Disconnect the 8 shift solenoid valve connectors.

(c) Disengage the clamp.

(d) Remove the bolt, lock plate and transmission wire from the transmission valve body assembly.