Toyota Venza Quiz
U660e Automatic Transmission / Transaxle

Speed Sensor(when Using The Engine Support Bridge)

In this manual: U660e Automatic Transmission / Transaxle
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
01020304050118N·mlb·ft
Tightening torque found on this page
Components COMPONENTS ILLUSTRATION
Removal REMOVAL PROCEDURE

1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

See page


2. REMOVE SPEED SENSOR

(a) Disconnect the speed sensor connector.

(b) Remove the 2 bolts and speed sensor from the transmission valve body assembly.
Installation INSTALLATION PROCEDURE

1. INSTALL SPEED SENSOR

(a) Coat the 2 bolts with ATF.

(b) Install the speed sensor to the transmission valve body assembly with the 2 bolts.

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

(c) Connect the speed sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

See page

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.