Brake system (hybrid)
Connecting brake lines to hydraulic unit, RHD vehicles
On hydraulic unit:
| 1 - |
From hydraulic unit to rear left brake caliper. |
- Identification: Ш 5.25 mm and flare nut with thread M 10 x 1
| 2 - |
From hydraulic unit to front right brake caliper. |
- Identification: Ш 5.25 mm and flare nut with short thread M 12 x 1
| 3 - |
From hydraulic unit to front left brake caliper. |
- Identification: Ш 5.25 mm and flare nut with thread M 10 x 1
| 4 - |
From hydraulic unit to rear right brake caliper |
- Identification: Ш 5.25 mm and flare nut with short thread M 12 x 1
| A - |
From hydraulic unit to primary piston circuit of brake master cylinder. |
- Identification: Ш 6 mm and flare nut with thread M 12 x 1
| B - |
Hydraulic unit to brake system pressure accumulator -VX70- |
- Identification: Ш 6 mm and flare nut with thread M 12 x 1
|
|
 |
On brake master cylinder: |
|
 |
On brake system pressure accumulator -VX70-:
| A - |
Brake system pressure accumulator -VX70- to hydraulic unit |
- Identification: Ш 6 mm and flare nut with thread M 12 x 1
| B - |
Brake system pressure accumulator -VX70- to secondary piston circuit of brake master cylinder |
- Identification: Ш 6 mm and flare nut with thread M 12 x 1
|
|
 |
?
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?