Volkswagen Golf Quiz
Auxiliary heater

Dismantling and assembling burner unit

In this manual: Auxiliary heater
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Dismantling

  • Remove auxiliary heater → Chapter.
  • Dismantle auxiliary heater → Chapter.
  • Detach gasket -1- from blower housing.
  • Release and detach connector -2-.
  • Pull grommet -3- out of blower housing onto combustion pipe -4-, using only a little force, and at the same time lift burner unit off vertically upwards.

Assembling
Dismantling and assembling burner unit

Renew gasket -1- and grommet -3-.

  • Check sealing surfaces and clean if necessary.

Install in reverse order.

  • Make sure gasket -1- is positioned correctly and connector -2- is engaged securely.
Note To prevent a short circuit at wiring/line connections to glow plug with flame monitor -Q8- make sure that the seal/gasket -1- is positioned correctly and that the connector -2- is engaged correctly.

Specified torque

→ Chapter „Assembly overview - auxiliary heater attachments“
Dismantling and assembling burner unit

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.