Volkswagen Golf Quiz
Auxiliary heater

Removing and installing covers for auxiliary heater control unit -J364

In this manual: Auxiliary heater
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

  • Switch off electrical consumers.
  • Switch off auxiliary and supplementary heater and switch off ignition.
  • Remove auxiliary heater → Chapter.
  • Dismantle auxiliary heater as far as necessary to gain access to covers for auxiliary heater control unit -J364- → Chapter.
  • Detach cable cover -1- from blower housing.
  • Unclip covers for auxiliary heater control unit -J364--2--arrows- to remove.
  • Dismantling heater unit → Chapter.
  • Removing and installing glow plug with flame monitoring -Q8- → Chapter.
  • Remove temperature sensor -G18- and overheating sensor -G189-.

Installing

  • Renew seals.
Removing and installing covers for auxiliary heater control unit -J364
  • Check that seals -arrows- are not damaged and are seated correctly.
  • Check sealing surfaces for dirt and damage.
  • Before installing cover, lightly coat seals with coolant.
  • Remaining installation steps are performed in reverse order of removal.

Specified torque

→ Chapter „Assembly overview - auxiliary heater attachments“
Removing and installing covers for auxiliary heater control unit -J364

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.