Volkswagen Golf Quiz
Heating, air conditioning

Removing and installing evaporator temperature sensor -G308-, RHD vehicles

In this manual: Heating, air conditioning
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Removal wedge -3409-

Note Only vehicles with air conditioning system; on vehicles with heater, opening in heater is sealed off.

Removing

Note

Evaporator temperature sensor -G308- is accessible from footwell.
Removing and installing evaporator temperature sensor -G308-, RHD vehicles
  • Release evaporator temperature sensor -G308- using removal wedge -3409-.
  • Pull evaporator temperature sensor -G308--2- out of housing.
  • Disconnect electrical connector -1-.

Installing

Install in reverse order.
Removing and installing evaporator temperature sensor -G308-, RHD vehicles

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.