Volkswagen Golf Quiz
Electrical system

Removing and installing hazard warning light switch -EX3-

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing
  • Grasp front passenger side airbag deactivated warning lamp -K145--1- at sides -arrows A- and pull it out of dash panel.
  • Disconnect electrical connectors.
Removing and installing hazard warning light switch -EX3-
  • Release fasteners -arrows-.
  • Press hazard warning light switch -EX3--2- out of front passenger side airbag deactivated warning lamp -K145- in direction of arrow -A-.

Installing

Installation is carried out in the reverse sequence.

  • Test functionality.
Removing and installing hazard warning light switch -EX3-

Removing and installing buttons for seat heating -E653-/-E654-

Note Buttons for seat heating are integrated in the operating and display unit (heater control unit -J65-/air conditioning system control unit -J301-/Climatronic control unit -J255-). These components cannot be renewed separately if defective.
  • Removing and installing -J65-/-J301-/-J255- → Heating, air conditioning; Rep. gr.87.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.