Electrical system

Removing and installing the starter button -E378-

~1min read
Note The removal and installation procedures are described for LHD vehicles. Removal and installation for RHD vehicles are similar.

Removing

  • Unclip and remove gear lever gaiter upwards from centre console → Rep. gr.34.
  • Press starter button -E378--1- out of centre console -2- from below. When doing so, retaining clips become released.
  • Disconnect electrical connectors.

Installing

Installation is carried out in the reverse sequence.

  • Test functionality.
Removing and installing the starter button -E378-

Removing and installing rear lid contact switch for anti-theft alarm -F123-

Note The rear lid contact switch is an integral part of the rear lid lock and cannot be renewed individually.
  • Removing and installing rear lid lock → General body repairs, exterior; Rep. gr.55.

Removing and installing vanity mirror contact switch -F147-/-F148-

Note The vanity mirror contact switch is as integral part of the sun visor bracket and cannot be renewed individually if defective.
  • Removing and installing sun visor → General body repairs, interior; Rep. gr.68.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.