Electrical system

Removing and installing headlight range control regulator -E102-

~1min read
Note The removal and installation procedures are described for LHD vehicles. Removal and installation for RHD vehicles are similar.

Removing

  • Remove rotary light switch -EX1- → Chapter.
  • Remove bolt -1-.
  • Remove trim -2- together with headlight range control regulator -E102- from dash panel.
  • Disconnect electrical connectors.
Removing and installing headlight range control regulator -E102-
  • Press fasteners on headlight range control regulator -E102--1- in direction of arrow -A-.
  • Push headlight range control regulator -E102--1- out of trim.

Installing

Installation is carried out in the reverse sequence.

  • Test functionality.
Removing and installing headlight range control regulator -E102-

Removing and installing button for Charisma -E735-

Removing and installing → Chapter

Removing and installing TCS and ESP button -E256-

Removing and installing → Chapter

Removing and installing TCS and ESP button -E256-

Removing and installing → Chapter

Removing and installing park assist steering button -E581-

Removing and installing → Chapter

Removing and installing park assist steering button -E581-

Removing and installing → Chapter

Removing and installing button for Charisma -E735-

Removing and installing → Chapter

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.