General body repairs, interior
Removing and installing lower rear lid trim
In this manual: General body repairs, interior
~1min read
Special tools and workshop equipment required |
|
|
Removing

- Remove bolts -2-.
- Unclip service flaps at sides of trim -3-.
- Grasp in service holes in trim.
- Release trim -3- with a »firm jerk« from mountings in rear lid -1-.
- Check if all retaining clips -4- are inserted in trim -3-.
- Unclip any retaining clips left in rear lid using removal tool -T40280-.
- Fit those retaining clips back in trim -3-.
Installing Note
Before installing, check all fasteners for damage and renew if necessary.Installation is carried out in reverse order.Specified torques
|
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Note