Volkswagen Golf Quiz
General body repairs, interior

Removing and installing upper rear lid trim

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Special tools and workshop equipment required

Wedges -T10383
Wedges -T10383

Removing

Removing and installing upper rear lid trim
  • Detach retaining straps for rear shelf on left and right from window frame.
  • Release centre window frame -2- from mountings in rear lid and side trim panels -3- using wedge -T10383-.
  • Remove centre window frame -2-.
  • Release side window frame -3- from catches in rear lid and lower rear lid trim -1- using wedge -T10383-.
  • Remove side window frame -3-.

Installing

Note
  • Before installing, check all fasteners for damage and renew if necessary.
  • Remove any retaining clips left in mountings in rear lid using removal tool -T40280- and fit them in window frames for installation.

Installation is carried out in reverse order.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.